Lithium UPS · Inverter · LiFePO₄ Battery Sales@hideaups.com
Get a Quote

HI Floor-Standing Battery

900 mm wide, 175 mm deep, IP65 — a battery that fits under a window or against an outside wall, where a cabinet would not go.

Outdoor storage is usually an afterthought in residential design: the inverter goes outside because the cable run is shorter, and then the battery has to follow.

The HI is built for that sequence. At 175 mm deep it fits the strip of wall beside a door or under a window, and the IP65 enclosure means it does not need a plant room. The 200 A BMS matches a 10 kW inverter, which is the size most outdoor whole-house systems land on.

The installation rule that matters is drainage. Water enters through glands, not through the enclosure, so mount on a plinth and bring cables in from below with a drip loop. Do that and the rating holds for a decade; skip it and the first autumn storm finds the terminals.

Available models1 series

ModelTypeTypical applicationsNotes
HI Series HI Series Floor-standing IP65 LiFePO4 battery, 51.2 V Outdoor and semi-outdoor solar storage, wall-side installation, sites with dust or hose-down cleaning IP65 enclosure allows outdoor installation under an eave; avoid direct sun and standing water

Models with links have detailed specification pages; unlisted models are also available on request. Capacity and quantity should be sized by our engineers against the actual load — never by nameplate rating alone.

HI Floor-Standing Battery — frequently asked questions

Is IP65 enough for coastal sites?
For salt haze and rain on a sheltered wall, yes. For direct sea spray, add an outdoor cabinet and inspect the glands annually.
Can it stand on bare ground?
No. Use a 100 mm plinth or a concrete pad, and keep the bottom gland clear of standing water.
How is it anchored?
Two wall brackets at the rear top edge plus four floor feet. Anchor the wall brackets where the site has seismic requirements or where vehicles pass.

Other Storage Batteries categories

Compare the alternatives within the same product line.

HA Wall-Mounted Battery

25.6 V and 51.2 V wall-mounted LiFePO4 modules from 2.56 kWh to 10.24 kWh, 100–314 Ah, with built-in BMS, Bluetooth, Wi-Fi and CAN/RS485.

View details

HB Stacked Battery

51.2 V stacked LiFePO4 modules, 100–314 Ah, 5.12–16.08 kWh per stack position, expandable in the field with a shared busbar and BMS addressing.

View details

HC Rack-Mount Battery

19-inch rack-mount 51.2 V LiFePO4 modules, 100–314 Ah, 5.12–16.08 kWh, with smart BMS, front LCD and CAN/RS485 communication.

View details

HD Lead-Acid Replacement Battery

12.8 V and 25.6 V LiFePO4 blocks in standard lead-acid case sizes, 100–314 Ah, 1.28–4.02 kWh, with built-in BMS and optional Bluetooth monitoring.

View details

HF Tower Battery

Tower-format 51.2 V LiFePO4 battery, 280–628 Ah, 14.3–32.2 kWh, 200 A charge and discharge, LCD, CAN/RS485 and 8,000-cycle cells.

View details

HH Vertical Battery

Vertical 51.2 V LiFePO4 battery, 200–628 Ah, 10.2–32.2 kWh across six models, with LCD, CAN/RS485, Bluetooth, Wi-Fi and 8,000-cycle cells.

View details
Email Us WhatsApp