PPS-G2000 2 kW Portable Power Station, 2240 Wh IP65

The G2000 is the point where a portable station stops being a camping product and becomes site equipment. 2240 Wh at 2000 W continuous covers a mobile workshop, a lighting rig or a shelter's essential circuits for a working shift; the draw-bar case and wheels mean it is moved by one person rather than lifted by two.

Where it fits

Use it where mains power exists but is unreliable or distant: outside broadcast, temporary event infrastructure, maintenance crews, and small off-grid cabins. The 450 W charging ceiling means a full recharge from empty takes roughly five to six hours on mains or a matched solar array.

What to check before ordering

Check the continuous load, not just the nameplate. Motor starting draws several times running current; the 4000 W peak handles short surges, but a sustained 2 kW heater will run the pack down in about an hour. If the destination uses 110 V, order that variant — it is a factory build, not a switch setting.

Product views

G2000 Series portable power station view 1

G2000 Series portable power station view 2

G2000 Series portable power station view 3

G2000 Series portable power station view 4

G2000 Series portable power station view 5

Models in this series: PPS-G2000. Photographs show the series enclosure; finish and port layout vary by configuration. Select a view to open the full-size image.

For fixed installations, see the all-in-one ESS range and the HC rack-mount LiFePO4 battery. The full product catalogue lists every series with its model table.

Key Features

2240 Wh LiFePO4 at 22.4 V

2000 W rated / 4000 W peak pure sine AC output

450 W DC input and 450 W MPPT solar input

IP65 sealed draw-bar case with wheels

QC3.0 × 2, PD 18 W × 2, 12 V DC and two AC outlets

12–24 V vehicle charging at 100 W

560 × 335 × 230 mm, 28.6 kg — one-person handling

-10 °C to 50 °C operating range

Applications

Field and mobile power

Mains, solar and vehicle charging in one unit, so a crew is not tied to a generator or a fixed supply.

Temporary backup

10 ms transfer keeps IT equipment, instruments and communications running through a mains interruption.

Off-grid sites

LiFePO4 cells and MPPT solar input support repeated daily cycling at remote locations.

FAQ

How long will it run a 500 W load?

About four hours nominal. Allow roughly 10% for inverter and conversion losses, so plan on 3.5–4 hours of real runtime.

Can it charge and discharge at the same time?

Yes, mains and solar inputs can feed loads while charging, but total input is limited to 450 W, so sustained loads above that still draw down the battery.

Is the output voltage switchable?

No. The standard build is 220/230/240 V 50 Hz. 100/110/120 V versions are separate part numbers built to order.

What is the difference from the GQ suitcase series?

Capacity and format. The GQ is a 1.0–1.5 kWh hand-carried case; the G2000 is a 2.24 kWh wheeled draw-bar case with a larger 2 kW inverter.

Specification reference

Parameter	PPS-G2000
Battery
Capacity	2240 Wh
Cell chemistry	LiFePO4
Nominal voltage	22.4 V
Total capacity	700000 mAh
Inverter & output
AC rated power	2000 W
AC peak power	4000 W
Inverter class	Pure sine wave
AC voltage / frequency	220/230/240 V, 50 Hz (100/110/120 V built to order)
Input & charging
DC input	DC 25.2 V, 20 A, 450 W max
MPPT solar input	DC 25.2 V, 20 A, 450 W max
Vehicle input	DC 12–24 V, 5 A, 100 W max
Ports
USB	QC3.0 × 2
USB-C PD	PD 18 W × 2
DC5521	12 V / 10 A
AC outlets	2
Protection
Ingress rating	IP65
Operating temperature	-10 °C to 50 °C
Protection	Under/over voltage, over current, over temperature, overload, over discharge, short circuit
Mechanical
Product size	560 × 335 × 230 mm
Net weight	28.6 kg
Package size	590 × 390 × 247 mm
Gross weight	30.4 kg

Specifications subject to the latest factory data. Final configuration is sized against the actual load, backup runtime and site power conditions — this table is for pre-selection only.