G2000 Series 2 kW IP65 Trolley Power Stations

Two kilowatts on wheels — the smallest unit in the range that can run a full mobile workshop for a shift.

Above about 20 kg, wheels matter more than watt-hours. The G2000 puts 2240 Wh into a sealed draw-bar case so the unit can be rolled from a vehicle to the work position, then left running outdoors. It shares the same LiFePO4 platform and protection set as the rest of the PPS range, which keeps spares, chargers and service procedures common.

All models in this sub-category are listed with their specification table on the G2000 Series product page.

Available models1 series

ModelTypeTypical applicationsNotes
G2000 Series G2000 Series Draw-bar trolley portable power station, LiFePO4, IP65 Mobile workshops, event and broadcast power, emergency shelters, off-grid cabins, tool charging Standard output is 220/230/240 V 50 Hz; 100/110/120 V variants are built to order, not switched in the field

Models with links have detailed specification pages; unlisted models are also available on request. Capacity and quantity should be sized by our engineers against the actual load — never by nameplate rating alone.

G2000 Series 2 kW IP65 Trolley Power Stations — frequently asked questions

How long will it run a 500 W load?
About four hours nominal. Allow roughly 10% for inverter and conversion losses, so plan on 3.5–4 hours of real runtime.
Can it charge and discharge at the same time?
Yes, mains and solar inputs can feed loads while charging, but total input is limited to 450 W, so sustained loads above that still draw down the battery.
Is the output voltage switchable?
No. The standard build is 220/230/240 V 50 Hz. 100/110/120 V versions are separate part numbers built to order.
Email Us WhatsApp