Portable Power Stations
A complete power system in one case — no installation, no separate battery cabinet, no commissioning beyond connecting the load.
A portable power station is a complete power system in one enclosure: LiFePO4 cells, BMS, pure sine inverter, MPPT charger and distribution outlets. It needs no installation, no separate battery cabinet and no commissioning beyond connecting the load.
HighIdea's PPS range runs from a 1024 Wh sealed suitcase at 1200 W to a 16.08 kWh wheeled unit at 5 kW. Two enclosure families cover different handling requirements: IP65 sealed hard cases for hand-carried field work, and IP54 draw-bar cases with industrial connectors for site and commercial backup. Rugged case variants add reinforced corners and front-opening access for repeated transport.
All models use LiFePO4 cells, pure sine output and the same protection set — under/over voltage, over current, over temperature, overload, over discharge and short circuit. Mains, solar and vehicle charging are supported, and most models provide a 10 ms UPS transfer so IT equipment and instruments ride through a mains interruption.
For fixed residential and commercial storage, see the all-in-one ESS range.
Sub-categories7 ranges
GQ Series IP65 Suitcase Power Stations
Sealed IP65 suitcase power stations, 1024–1536 Wh and 1200–2000 W, with 10 ms UPS transfer and 110/230 V full-voltage variants.
1 series — selection guide →G2000 Series 2 kW IP65 Trolley Power Stations
Wheeled 2 kW / 2240 Wh sealed trolley power stations for mobile workshops, events and emergency site power.
1 series — selection guide →GD304 Series 3–4 kW Draw-Bar Power Stations
3–4 kW / 4–5.9 kWh IP54 draw-bar stations with high-voltage MPPT, 10 ms UPS and Bluetooth monitoring.
1 series — selection guide →GD408 Series 4–5 kW High-Capacity Power Stations
4–5 kW / 5–16 kWh IP54 draw-bar stations with four AC outlets, 16/32 A connectors, 10 ms UPS and wide MPPT input.
1 series — selection guide →GD516 Series 5 kW / 10–16 kWh Power Stations
5 kW / 10–16.08 kWh IP54 draw-bar stations with 3000 W mains charging, 5 kW MPPT and 10 ms UPS transfer.
2 series — selection guide →GQ200 Series Rugged Case Power Stations
Rugged backpack-case 2 kW / 2048 Wh stations with full-voltage output, 800 W MPPT and 10 ms UPS transfer.
1 series — selection guide →GQ201 Series Upright Rugged-Case Power Stations
Upright front-opening rugged case, 2 kW / 2048 Wh, full-voltage output, 800 W MPPT and 10 ms UPS transfer.
1 series — selection guide →GQ Series IP65 Suitcase Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GQ Series
|
Sealed suitcase portable power station, LiFePO4, IP65 | Field service, outdoor broadcast, emergency response, remote instrumentation, off-grid tools | Full-voltage output means 100/110/120 V and 220/230/240 V variants are separate part numbers — confirm destination voltage before quoting |
Selection guide & all GQ Series IP65 Suitcase Power Stations models →
G2000 Series 2 kW IP65 Trolley Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 G2000 Series
|
Draw-bar trolley portable power station, LiFePO4, IP65 | Mobile workshops, event and broadcast power, emergency shelters, off-grid cabins, tool charging | Standard output is 220/230/240 V 50 Hz; 100/110/120 V variants are built to order, not switched in the field |
Selection guide & all G2000 Series 2 kW IP65 Trolley Power Stations models →
GD304 Series 3–4 kW Draw-Bar Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GD304 Series
|
High-power draw-bar portable power station, LiFePO4, IP54 | Construction sites, mobile medical and command units, UPS-backed field systems, off-grid work camps, film and event power | GD305, GD306 and GD405 are capacity and output variants of the same platform; request the model-specific datasheet before finalising a bill of materials |
Selection guide & all GD304 Series 3–4 kW Draw-Bar Power Stations models →
GD408 Series 4–5 kW High-Capacity Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GD408 Series
|
High-capacity draw-bar portable power station, LiFePO4, IP54 | Small commercial backup, off-grid homes, telecom field sites, mobile workshops, event distribution | G5000 is also built as a 110 V version; specify the destination voltage when ordering |
Selection guide & all GD408 Series 4–5 kW High-Capacity Power Stations models →
GD516 Series 5 kW / 10–16 kWh Power Stations2 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GD516 Series
|
High-capacity draw-bar portable power station, LiFePO4, IP54 | Whole-home and small-business backup, off-grid cabins, remote telecom, mobile clinical and command units | GD512 is a capacity variant on the same chassis; request its model datasheet for exact figures |
| Custom capacity builds | ODM configuration | Project-specific autonomy | Capacity and output configured to the load profile |
Selection guide & all GD516 Series 5 kW / 10–16 kWh Power Stations models →
GQ200 Series Rugged Case Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GQ200 Series
|
Rugged backpack-case portable power station, LiFePO4, IP54/IP65 | Field survey, defence and emergency response, outside broadcast, remote instrumentation, expedition support | The GQ200-2400W is a higher-output variant; request its datasheet for the exact inverter rating |
Selection guide & all GQ200 Series Rugged Case Power Stations models →
GQ201 Series Upright Rugged-Case Power Stations1 series
| Model | Type | Typical applications | Notes |
|---|---|---|---|
 GQ201 Series
|
Upright rugged-case portable power station, LiFePO4, IP54/IP65 | Mobile command posts, field communications, emergency lighting, remote test benches, expedition power | The GQ201-2400W is the higher-output variant; request its datasheet for the confirmed inverter rating |
Selection guide & all GQ201 Series Upright Rugged-Case Power Stations models →
Models with links have detailed specification pages; unlisted models are also available on request. Capacity and quantity should be sized by our engineers against the actual load — never by nameplate rating alone.
Portable Power Stations — frequently asked questions
What capacity and output do you cover?
What is the difference between the case families?
Can they protect IT equipment during a mains interruption?
Do you build project-specific capacities?
Other product lines
Every HighIdea range has its own category page with sub-categories, model tables and a selection guide.
UPS Power Supply
Online, offline, lithium, three-phase high-frequency and transformer-isolated industrial UPS from 500VA to 600kVA — tower and rack, plus 100/110/120V low-voltage models for global markets.
View category →Power & Telecom Inverters
Rack-mount DC-AC inverters that turn station and telecom DC buses from 12 to 300VDC into fully isolated 220Vac power for substations, base stations, HVDC rooms and industrial control.
View category →Switching Power Supplies & Rectifiers
19-inch AC-DC rectifiers, embedded telecom power systems and DC-DC converters that deliver stable 24 / 48 / 110 / 220VDC to base stations, DC panels, substations and industrial control cabinets.
View category →Solar Inverters
Single-phase and three-phase hybrid inverters from 1.2 kW to 15 kW — off-grid, grid-interactive, split-phase 120/240 V and 380 V three-phase, on 12 V to 48 V batteries.
View category →Storage Batteries
LiFePO4 battery modules from 1.28 kWh to 32.2 kWh in seven form factors — wall-mounted, stacked, 19-inch rack, lead-acid replacement, tower, vertical and IP65 floor-standing.
View category →All-in-One ESS
Inverter, BMS and LiFePO4 battery in one cabinet — 300 W portable packs through 15 kW three-phase systems, 896 Wh to 32 kWh, for the EU, US and export markets.
View category →Accessories & BMS
SNMP cloud monitoring cards, smart BMS boards and matched LiFePO4 chargers — the parts that decide whether a system reports honestly and reaches its rated cycle life.
View category →