GD408 Series 4–5 kW High-Capacity Power Stations

The point where a portable station replaces a small generator: 5 kW, up to 16 kWh, and proper distribution connectors.

Once a site needs more than two outlets, the connector set matters as much as the battery. This series carries four AC sockets plus 16 A / 32 A industrial connectors, so it can feed a distribution box instead of a power strip. The 10 ms transfer and Bluetooth monitoring make it usable as a temporary UPS for a small commercial installation while the permanent system is being commissioned.

All models in this sub-category are listed with their specification table on the GD408 Series product page.

Available models1 series

ModelTypeTypical applicationsNotes
GD408 Series GD408 Series High-capacity draw-bar portable power station, LiFePO4, IP54 Small commercial backup, off-grid homes, telecom field sites, mobile workshops, event distribution G5000 is also built as a 110 V version; specify the destination voltage when ordering

Models with links have detailed specification pages; unlisted models are also available on request. Capacity and quantity should be sized by our engineers against the actual load — never by nameplate rating alone.

GD408 Series 4–5 kW High-Capacity Power Stations — frequently asked questions

Can several units be paralleled?
Parallel operation depends on the inverter firmware and is not a standard feature on this range. Tell us the required load and we will confirm the supported configuration.
What does 10 ms UPS transfer protect?
Computers, network equipment, instruments and most switching supplies ride through a 10 ms break. Sensitive process or medical equipment may need an online UPS instead.
Which model for a small shop?
A 5 kW / 10.24 kWh G5000 covers lighting, refrigeration and point-of-sale through a typical outage. Size it from the measured load profile rather than the floor area.
Email Us WhatsApp