GD304 Series 3–4 kW IP54 draw-bar power station

A 3–4 kW mobile station built around a high-voltage MPPT input: 4019 Wh or 5888 Wh of LiFePO4, 10 ms transfer, Bluetooth monitoring, and a wheeled IP54 case for site work.

GD304 Series Product image
Appearance may vary by configuration; final specifications per quotation.
Brand
HighIdea
Type
High-power draw-bar portable power station, LiFePO4, IP54
Typical applications
Construction sites, mobile medical and command units, UPS-backed field systems, off-grid work camps, film and event power
Models in range
PPS-GD304, PPS-GD305, PPS-GD306, PPS-GD405, PPS-GD406
Category
Portable Power Stations

The GD304 platform is specified when solar is the primary charging source rather than an accessory. Its PV 65–450 V / 3–4 kW MPPT input accepts a full series string of panels without a separate charge controller, so a work camp or a mobile command unit can run for days on a fixed array. The GD304 (4019 Wh / 3000 W) and GD406 (5888 Wh / 4000 W) are the catalogue configurations; GD305, GD306 and GD405 are variants on the same chassis.

Where it fits

Construction and field sites, mobile clinics, outside broadcast, emergency command posts and off-grid cabins. Two AC outlets plus a 16 A industrial connector feed distribution boxes directly, and the 10 ms transfer lets the unit sit in front of equipment that cannot tolerate a mains interruption.

What to check before ordering

Confirm the PV string open-circuit voltage stays inside 65–450 V at the coldest expected temperature — that limit is the usual cause of field commissioning problems. Also confirm the model-specific capacity for GD305, GD306 and GD405; they share the enclosure but not the battery or inverter rating.

Product views

For fixed installations, see the all-in-one ESS range and the HC rack-mount LiFePO4 battery. The full product catalogue lists every series with its model table.

Key Features

  • 4019 Wh or 5888 Wh LiFePO4 at 12.8 V / 25.6 V
  • 3000 W / 4000 W rated, 6000 W / 8000 W peak, pure sine wave
  • High-voltage MPPT: PV 65–450 V, 3000 W / 4000 W max
  • 1500 W / 2000 W mains charging, 10 ms UPS transfer
  • Bluetooth app monitoring and status display
  • QC3.0 × 2, PD 18 W × 2, 16 A industrial connector, AC × 2
  • IP54 wheeled draw-bar case, 670 × 450 × 310 mm
  • 42 kg / 57 kg net — two-person lift, one-person roll

Applications

Field and mobile power

Mains, solar and vehicle charging in one unit, so a crew is not tied to a generator or a fixed supply.

Temporary backup

10 ms transfer keeps IT equipment, instruments and communications running through a mains interruption.

Off-grid sites

LiFePO4 cells and MPPT solar input support repeated daily cycling at remote locations.

FAQ

Can I connect solar panels directly?
Yes. The MPPT accepts PV 65–450 V and up to 3000 W on the GD304 or 4000 W on the GD406. Design the string so cold-weather open-circuit voltage stays below 450 V.
Is it a UPS?
It provides a 10 ms transfer, which protects IT and instrumentation loads. It is not a zero-break online UPS.
What is the difference between GD304, GD305, GD306, GD405 and GD406?
They are capacity and inverter-output variants of the same IP54 draw-bar chassis. The catalogue gives full data for GD304 and GD406; ask for the model datasheet for the other three.
How weatherproof is IP54?
Protected against dust ingress and water splashes from any direction. It is designed for covered outdoor use, not for standing rain or immersion.

Specification reference

Parameter PPS-GD304PPS-GD406
Battery
Capacity 4019.2 Wh5888 Wh
Cell chemistry LiFePO4
Nominal voltage 12.8 V25.6 V
Total capacity 1256000 mAh1840000 mAh
Inverter & output
AC rated power 3000 W4000 W
AC peak power 6000 W8000 W
AC voltage / frequency 220/230/240 V, 50/60 Hz
UPS transfer 10 ms
Monitoring Bluetooth app
Input & charging
AC input 1500 W max2000 W max
MPPT solar input PV 65–450 V, 3000 W maxPV 65–450 V, 4000 W max
Ports
USB QC3.0 × 2
USB-C PD PD 18 W × 2
Industrial connector AC 16 A
AC outlets 2
Protection
Ingress rating IP54
Operating temperature -10 °C to 50 °C
Protection Under/over voltage, over current, over temperature, overload, over discharge, short circuit
Mechanical
Product size 670 × 450 × 310 mm
Net weight 42 kg57 kg
Package size 740 × 510 × 350 mm
Gross weight 57 kg75 kg

Specifications subject to the latest factory data. Final configuration is sized against the actual load, backup runtime and site power conditions — this table is for pre-selection only.

Email Us WhatsApp