PPS-GD510 / GD512 / GD516, 5 kW Portable Power Station, 10–16 kWh

The GD510 and GD516 are the top of the portable range: 51.2 V LiFePO4 packs of 10.24 and 16.08 kWh behind a 5 kW / 10 kW peak inverter. Both charge at up to 3000 W from mains and 5000 W from a PV 65–450 V array, which means a full recharge in roughly four hours from mains or a productive solar day from a properly sized string.

Where it fits

Whole-home essential circuits, small shops and clinics, off-grid cabins, remote telecom shelters and mobile command units. At a 1 kW average load the 16.08 kWh unit provides roughly fourteen hours of autonomy; at 500 W, closer to a day and a half.

What to check before ordering

Plan the delivery route before ordering: at 102–113 kg net these units are placed by trolley and lifted with equipment, not carried. Confirm the 16 A / 32 A distribution arrangement on site, and verify the PV string's cold-weather open-circuit voltage against the 450 V maximum.

Product views

GD516 Series portable power station view 1

GD516 Series portable power station view 2

GD516 Series portable power station view 3

GD516 Series portable power station view 4

GD516 Series portable power station view 5

Models in this series: PPS-GD510, PPS-GD512, PPS-GD516. Photographs show the series enclosure; finish and port layout vary by configuration. Select a view to open the full-size image.

For fixed installations, see the all-in-one ESS range and the HC rack-mount LiFePO4 battery. The full product catalogue lists every series with its model table.

Key Features

10.24 kWh or 16.0768 kWh LiFePO4 at 51.2 V

5 kW rated / 10 kW peak pure sine output

3000 W mains charging and PV 65–450 V / 5000 W MPPT solar

10 ms UPS transfer with Bluetooth monitoring

Three AC outlets plus AC 220 V 16 A / 32 A industrial connector

QC3.0 × 2 and PD 18 W × 2

IP54 wheeled enclosure, 700 × 660 × 438 mm

102 kg / 113 kg net — position by trolley, lift with equipment

Applications

Field and mobile power

Mains, solar and vehicle charging in one unit, so a crew is not tied to a generator or a fixed supply.

Temporary backup

10 ms transfer keeps IT equipment, instruments and communications running through a mains interruption.

Off-grid sites

LiFePO4 cells and MPPT solar input support repeated daily cycling at remote locations.

FAQ

How long does a full recharge take?

About four hours from a 3000 W mains input for the 10.24 kWh unit, and roughly six hours for 16.08 kWh. A 5 kW solar array can do it in a good solar day.

Can it run a whole house?

Essential circuits, yes — lighting, refrigeration, networking and electronics. Whole-house air conditioning or electric heating needs a fixed ESS, not a portable unit.

Is the GD512 the same as the GD510?

It is a capacity variant on the same chassis. Ask for the model datasheet for its exact capacity, weight and charging figures.

Does it need an electrician to install?

No fixed installation is required, but the 16 A / 32 A output feeding a distribution board should be connected by a qualified electrician.

Specification reference

Parameter	PPS-GD510	PPS-GD516
Battery
Capacity	10.24 kWh	16.0768 kWh
Cell chemistry	LiFePO4
Nominal voltage	51.2 V
Total capacity	3200000 mAh	5024000 mAh
Inverter & output
AC rated power	5 kW
AC peak power	10 kW
AC voltage / frequency	220/230/240 V, 50/60 Hz
UPS transfer	10 ms
Monitoring	Bluetooth app
Input & charging
AC input	3000 W max
MPPT solar input	PV 65–450 V, 5000 W max
Ports
USB	QC3.0 × 2
USB-C PD	PD 18 W × 2
Industrial connector	AC 220 V 16 A / 32 A
AC outlets	3
Protection
Ingress rating	IP54
Operating temperature	-10 °C to 50 °C
Protection	Under/over voltage, over current, over temperature, overload, over discharge, short circuit
Mechanical
Product size	700 × 660 × 438 mm
Net weight	102 kg	113 kg
Package size	785 × 685 × 486 mm
Gross weight	127 kg	138 kg

Specifications subject to the latest factory data. Final configuration is sized against the actual load, backup runtime and site power conditions — this table is for pre-selection only.