PPS-GQ201 / GQ201-2400W Upright Rugged Case Power Station

The GQ201 uses the same 2048 Wh / 51.2 V / 2 kW electrical platform as the GQ200 but in an upright case that stands at a work position and opens from the front. That matters at a command post or a test bench, where a unit laid flat wastes space and the connections are harder to reach.

Where it fits

Mobile command posts, field communications racks, emergency lighting stands and remote test benches. The upright format keeps the front panel at working height and leaves the footprint small enough for a vehicle or tent.

What to check before ordering

Confirm the destination voltage (110 V or 230 V builds), the GQ201-2400W inverter rating if the higher-output variant is required, and the panel voltage range for the 12–60 V / 800 W MPPT input.

Product views

GQ201 Series portable power station view 1

GQ201 Series portable power station view 2

GQ201 Series portable power station view 3

GQ201 Series portable power station view 4

GQ201 Series portable power station view 5

Models in this series: PPS-GQ201, PPS-GQ201-2400W. Photographs show the series enclosure; finish and port layout vary by configuration. Select a view to open the full-size image.

For fixed installations, see the all-in-one ESS range and the HC rack-mount LiFePO4 battery. The full product catalogue lists every series with its model table.

Key Features

2048 Wh LiFePO4 at 51.2 V

2000 W rated / 4000 W peak pure sine output

Full-voltage 100/110/120 V or 220/230/240 V, 50/60 Hz

2000 W mains charging, 800 W MPPT and 100 W vehicle input

10 ms UPS transfer

QC3.0 × 2, PD 18 W × 2, 12 V DC, three AC outlets

Upright rugged case with front-opening access and vented panels

IP54 / IP65 protection, -10 °C to 50 °C operating range

Applications

Field and mobile power

Mains, solar and vehicle charging in one unit, so a crew is not tied to a generator or a fixed supply.

Temporary backup

10 ms transfer keeps IT equipment, instruments and communications running through a mains interruption.

Off-grid sites

LiFePO4 cells and MPPT solar input support repeated daily cycling at remote locations.

FAQ

What is the difference from the GQ200?

The electrical platform is the same 2048 Wh / 2 kW unit; the GQ201 uses an upright, front-opening rugged case rather than the horizontal backpack-style case.

Can it stand outdoors in rain?

The case is rated IP54/IP65 for splash and dust protection. Keep connectors closed and use it under cover in sustained rain.

Does it support solar charging?

Yes, DC 12–60 V / 18 A / 800 W max, plus 2000 W mains and 100 W vehicle input.

Is the 2400W variant a different battery?

It is a higher inverter output variant. Request the GQ201-2400W datasheet for the confirmed capacity and charging figures.

Specification reference

Parameter	PPS-GQ201
Battery
Capacity	2048 Wh
Cell chemistry	LiFePO4
Nominal voltage	51.2 V
Total capacity	640000 mAh
Inverter & output
AC rated power	2000 W
AC peak power	4000 W
Inverter class	Pure sine wave
AC voltage / frequency	100/110/120 V or 220/230/240 V, 50/60 Hz
UPS transfer	10 ms
Input & charging
AC input	2000 W max
MPPT solar input	DC 12–60 V, 18 A, 800 W max
Vehicle input	DC 12–24 V, 5 A, 100 W max
Ports
USB	QC3.0 × 2
USB-C PD	PD 18 W × 2
DC5521	12 V / 10 A
AC outlets	3
Protection
Ingress rating	IP54 / IP65
Operating temperature	-10 °C to 50 °C
Protection	Under/over voltage, over current, over temperature, overload, over discharge, short circuit
Mechanical
Format	Upright rugged case, front opening
Net weight	Approximately 30 kg class

Specifications subject to the latest factory data. Final configuration is sized against the actual load, backup runtime and site power conditions — this table is for pre-selection only.